تصاميم قوية بشهادات دولية. قابلة للتهيئة حسب نوع المضخة وعدد الفوهات ونظام الدفع واستعادة الأبخرة.
ثماني سلاسل تغطي كل شيء من جزيرة على الطريق السريع بثماني فوهات إلى وحدة مدمجة بجانب الخزان، مع تعبئة عالية التدفق حتى 400 L/min. اختر ما يناسب معدل التدفق والمساحة لديك.
موزعات للخدمة الشاقة حتى 8 فوهات مع شاشات ولوحات مفاتيح مزدوجة. مضخة ريشية أو ترسية أو غاطسة.
عرض 4 طرازات →
موزع من الفئة المتوسطة يوازن بين السعة والمساحة المشغولة والتكلفة. تشكيلات من 3 إلى 8 فوهات.
عرض 4 طرازات →
خزانة صغيرة لمستودعات الوقود والمخازن وجزر الوقود الخاصة. 1 أو 2 فوهة، 5–80 L/min.
عرض 2 طرازات →
موزع بشاشة LED مدمجة للإعلانات والعروض والوسائط بجانب المضخة. من 2 إلى 8 فوهات.
عرض 5 طرازات →
نقطة الدخول إلى مجموعة Classic. خزانة مدمجة بمضخة أو مضختين، حتى فوهتين، في مستويات الجودة الثلاثة جميعها.
عرض 6 طرازات →
قياس ميكانيكي وكهربائي ميكانيكي مُثبت. صيانة بسيطة وتوفر واسع لقطع الغيار.
عرض 7 طرازات →
تزويد بالوقود للخدمة الشاقة بمعدل 150–400 لتر/دقيقة لمحطات الشاحنات ومواقع التعدين ومستودعات الوقود. بهيئات قاعدة مفتوحة أو خزانة مغلقة.
عرض 3 طرازات →
تزويد بالوقود متنقل لأساطيل البناء والتعدين والزراعة والأساطيل الميدانية. 12V إلى 380V.
عرض 3 طرازات →We are a fuel dispenser manufacturer based in Zhejiang, China, and we build to order rather than to a fixed catalogue, so most projects start with the question of which type of unit fits. A fuel pump dispenser for a conventional forecourt pairs one pump with one or two hoses. A multi-fuel dispenser carries separate hydraulic paths for petrol, diesel, kerosene or AdBlue on a single frame. A truck mounted fuel dispenser or other mobile fuel dispenser moves the same metering hardware onto a skid, tank or vehicle for fleets that refuel in the field.
All three share the same metering, pulser and nozzle components and the same Ex-proof envelope. What changes is the frame, the pump arrangement and the power supply. Tell us the fuels, the flow rate and the mounting, and we will specify the series and the configuration.
معايير قياسية في سلسلة DT-G وDT-L وDT-T وDT-M وClassic. وتتبع الطرازات المثبتة على الشاحنات وطرازات DT-HF عالية التدفق الإطار الكهربائي وإطار الحماية من الانفجار نفسه، باستثناء معدل التدفق — راجع صفحة سلسلة DT-HF لنطاق 150–400 L/min.
قياسي: ≤50 لتر/دقيقة تدفق عالٍ: ≤90 لتر/دقيقة
±0.3%
Inlet: ≥54 kPa
Outlet: ≤0.3 MPa
380V 50 Hz
(220V optional)
−40 ~ +55 °C
30 ~ 90%
≤80 dB (Class A)
Ex d mb IIA T4 Gb
Certificate: CE011195
0.01 ~ 9999.99 (unit)
0.01 ~ 9999999999.99
0.01 ~ 99.99
≤0.15%
Customise each dispenser to your local requirements.
Vane pump, gear pump or submersible pump (V/G/S suffix). We help you choose based on flow, fuel type and tank distance.
IC card reader, UnionPay POS, coin-operated self-service, mechanical counter, small-ticket printer and voice broadcast.
Oil and gas recovery system integrated into the dispenser for Stage II compliance.
Pull-off valve, breakaway, stainless steel hoses, solar-powered cabinet and custom colour / logo.
Choosing a series, nozzle count, flow rate, fuels and Stage II vapor recovery. These are the questions buyers ask before specifying a fuel dispenser, answered by our engineering team.
Start with throughput and footprint. DT-T covers tank farms and depots with 1 or 2 nozzles at 5-80 L/min. DT-A is the compact entry cabinet. DT-L balances capacity, footprint and cost for standard retail. DT-G and DT-M take up to 8 nozzles, and DT-M adds a built-in LED screen for pump-side advertising. The Classic range gives five proven cabinets in three quality tiers. DT-HF is engineered for 150-400 L/min at truck stops and mining sites, and Truck-Mounted units move the same hardware onto a skid or a vehicle. Send us the fuels, the flow rate and the mounting and we will specify the series.
Between 1 and 8, depending on the series. DT-T and DT-A take 1 or 2 nozzles, DT-L takes 3 to 8, and DT-G, DT-M and the Classic cabinets take up to 8. Each nozzle position can be fed as a separate product, so one cabinet can serve several grades at the same time.
Standard models deliver up to 50 L/min and big-flow versions up to 90 L/min. The DT-HF series is engineered for high-throughput sites at 150 to 400 L/min. The flow a site actually reaches depends on the pump type (vane, gear or submersible) and on the hose, the nozzle bore and the distance from the tank.
Yes. A multi-fuel cabinet carries separate hydraulic paths for petrol, diesel, kerosene or AdBlue on a single frame, sharing the metering, pulser and nozzle components and the same Ex-proof envelope. What changes between grades is the pump arrangement and the nozzle and hose specification.
Yes. On our dispensers Stage II vapor recovery is specified as an integrated option rather than a bolt-on extra: the recovery path runs inside the cabinet and is chosen at the same time as the pump type, the nozzle count and the payment system.
Still have a question about your own station? Send us the tank size, the number of nozzles and the fuels you dispense, and we will come back with a configuration and a quote within 24-48 hours.
How a cabinet is sized to an island, and what to send us for a quotation within 24 to 48 hours.
Most enquiries about a petrol dispenser are really a question about nozzle count, because the count fixes the island length, the number of hoses and the hydraulic layout. A two nozzle fuel dispenser suits a single-grade island where traffic never queues. A four nozzle fuel dispenser covers the usual two-grade, two-hose layout. A six nozzle fuel dispenser adds a third grade without widening the island. An eight nozzle fuel dispenser is the answer for a motorway site running four grades on two hoses each. When a project does not land on one of those numbers, a multi nozzle fuel dispenser is built to the count you specify, within the per-series ceiling shown in the specification table above.
Nozzle count is only half the specification. A high flow fuel dispenser for trucks, buses or depot loading runs a larger meter and a bigger pump than a car forecourt cabinet, and the two cannot be interchanged afterwards without rebuilding the hydraulic path. Tell us the fuels, the litres per minute you need on the busiest hose and the island footprint, and we will answer with a series and a drawing rather than a catalogue number.
Because the cabinets, the pumps and the fuel dispenser parts inside them are all made here, a spare is never a dead end. Meters, pulsers, nozzles, breakaway couplings, hoses and the ATEX-certified electrical components come from the same factory, which matters when a site has to be back in service the same day. The same scope covers the rest of the service station equipment on a new build: submersible turbine pumps, Stage II vapor recovery, and the Stage III unit that closes the vapor loop.
That in-house range is why we are asked to bid as a fuel dispenser supplier and as a fuel dispenser factory on the same tender. A distributor wants one container of complete fuel dispensing equipment under a single certificate set; a station builder wants the same cabinet stripped back to what his own team will assemble. Both are routine orders for us. Send the tender documents, the destination country and the fuel list, and we will return a fuel dispenser price with the lead time, the certificate set that applies to your market and the shipping terms.
How a high flow lane is specified, and what buying direct from China changes.
Everything is built in one plant in Wenzhou, Zhejiang, and sold direct, so we are a China fuel dispenser supplier, a China fuel dispenser factory and a China fuel dispenser exporter at once. Buying through a fuel dispenser supplier in China normally means one fuel dispenser supplier China contact and one fuel dispenser factory China audit address, with a fuel dispenser made in China nameplate on every unit. A made in China fuel dispenser programme lives or dies on its paperwork, so we send the fuel dispenser China price list, the China fuel dispenser price sheet, the fuel dispenser manufacturer China registration and the China fuel dispenser spare parts list as one package.
On the high flow side we are both a high flow fuel dispenser manufacturer and a high flow fuel dispenser supplier for truck stops, bus depots and fleet yards. A high capacity fuel dispenser and a high flow rate fuel dispenser are the same machine at 110, 200 or 300 to 400 L/min, and the largest of them is a large flow fuel dispenser for hub stations. A high flow truck dispenser, or a high flow fuel dispenser for trucks, is ordered with a longer hose and a heavier breakaway coupling. A high flow fuel dispenser station usually pairs one such lane with ordinary 45 L/min lanes, which is why a high flow diesel dispenser, a high flow petrol dispenser and a high flow fueling position can share one island. For a high flow fuel dispenser price, send the flow rate, the nozzle count and the fuel.
Both lines ship from the same address, which is why a China high flow fuel dispenser is quoted on the same terms as a standard one and a high flow fuel dispenser China enquiry is answered by the dispenser team rather than a reseller. We also supply China petrol station equipment and act as a China gas station equipment supplier for the rest of the island: submersible turbine pumps, vapor recovery nozzles and hoses, flowmeters, solenoid valves, breakaway couplings, hose reels and AdBlue dispensers.
Talk to our engineering team and receive a technical and commercial proposal within 24–48 hours.
Get a Quote