LPG Pump — LPG Dispenser & Parts for fuel dispensing and station equipment.
A sliding-vane pump for high-flow LPG transfer. The built-in relief valve protects the pump and the line against over-pressure. Available as a bare pump head for a custom drive, as a motor-driven unit, or driven by a hydraulic motor — the hydraulic build runs at 653 rpm with the same 18 m³/h flow and 28.6 bar working pressure.
| Type | Sliding vane pump |
| Flow rate | 18 m³/h |
| Speed | 680 rpm |
| Max. speed | 800 rpm |
| Inlet | NPT 2″ |
| Outlet | NPT 2″ |
| Motor power | 7.5 kW, 380 V |
| Max. working pressure | 28.6 bar |
| Max. differential pressure | 12 bar |
| Built-in relief valve | Yes |
| Temperature range | −32 °C to +107 °C |
The DT-LPGP-2000 is a sliding-vane pump for high-flow LPG transfer, moving 18 m³/h at 680 rpm with a maximum speed of 800 rpm. Inlet and outlet are both NPT 2″, and the pump runs from a 7.5 kW, 380 V motor.
Maximum working pressure is 28.6 bar with 12 bar maximum differential. A relief valve is built into the pump, so the pump and the line are protected against over-pressure without adding a separate valve to the pipework.
It is available as a bare pump head for a custom drive, as a motor-driven unit or with a hydraulic motor. Tell us which arrangement you need and the line size downstream, and we will confirm the port and the drive details.
