LPG Pump — LPG Dispenser & Parts for fuel dispensing and station equipment.
A compact gear pump for small-volume LPG transfer. Runs on single-phase 220 V supply and delivers 36 L/min at up to 1.1 MPa differential pressure.
| Type | Gear pump |
| Flow rate | 36 L/min |
| Inlet | ¾″ NPT |
| Outlet | ¾″ NPT |
| Working voltage | 220 V |
| Motor speed | 2 850 rpm (50 Hz) |
| Motor power | 1.5 hp |
| Max. differential pressure | 1.1 MPa |
| Temperature range | −32 °C to +107 °C |
The DT-LPGP-30 is a gear pump for small-volume LPG work. It moves 36 L/min through ¾″ NPT inlet and outlet ports, runs on a single-phase 220 V supply at 2 850 rpm and turns a 1.5 hp motor, so it can be used where only domestic power is available.
Differential pressure is rated to 1.1 MPa, which is enough for cylinder filling and short transfer runs rather than long bulk lines. The wetted end is rated from −32 °C to +107 °C, covering the ambient range an LPG installation normally sees.
When you specify it, tell us the tank pressure, the line length and whether the pump drives a dispenser or a filling head — the inlet and outlet are fixed at ¾″ NPT, so the mating fittings matter as much as the flow rate.
