LPG Pump — LPG Dispenser & Parts for fuel dispensing and station equipment.
A compact LPG pump for cylinder filling and small transfer duties. Runs on single-phase 220 V supply and delivers 45 L/min at up to 25 bar working pressure.
| Flow rate | 12 gpm / 45 L/min |
| Inlet | 1¼″ NPT |
| Outlet | 1″ NPT |
| Working voltage | 220 V |
| Motor speed | 2 850 rpm (50 Hz) / 3 450 rpm (60 Hz) |
| Motor power | 1.5 hp |
| Max. working pressure | 25 bar (2.5 MPa) |
| Max. differential pressure | 7 bar (0.7 MPa) |
| Temperature range | −32 °C to +107 °C |
The DT-LPGP-60 delivers 45 L/min (12 gpm) and is rated to 25 bar working pressure with 7 bar maximum differential. That combination suits cylinder filling and short transfer duties, where the pump has to push against tank pressure rather than move product along a long line.
It runs on single-phase 220 V with a 1.5 hp motor, at 2 850 rpm on 50 Hz or 3 450 rpm on 60 Hz. Ports are 1¼″ NPT on the inlet and 1″ NPT on the outlet, and the wetted end is rated from −32 °C to +107 °C.
Confirm the supply frequency when you order — the same pump is built for both 50 Hz and 60 Hz markets, and the speed difference is worth checking against the flow you need at the nozzle.
