Our new high flow fuel dispenser just finished assembly on the shop floor — an open-skid unit built for mining sites, tank farms and tanker loading. Here is a first look, straight from the workshop.
High flow fuel dispenser 120/220 LPM open-skid, full view on the workshop floor
One Dispenser, Two Flow Rates
Twin CP8 combination pumps sit side by side inside the skid. Run one pump for everyday refuelling at about 120 L/min, or run both for about 220 L/min when a tanker or haul truck is waiting — the mode is selected on the machine, with no hardware change between jobs.
Twin Everything, Inside and Out
Two J6 flow meters keep metering error within ±0.30%, a D40 solenoid valve and stainless check valves control the line, and everything ends in a 2-inch stainless high-flow nozzle. 380 V, twin 1.1 kW motors — and every component is made and tested in our own workshops.
Full data sheet, the shipped configuration and the FAQ live on the high flow fuel dispenser page, and the whole family is on the DT-HF series page. Send your site layout through the enquiry form and we will quote within 24–48 hours.
