A high flow fuel dispenser built for the heaviest refuelling jobs: two heavy-duty CP8 pump units, two J6 flow meters and a 2-inch high-flow nozzle on one open skid. Flow is switchable between a ~120 L/min single-pump mode and a ~210 L/min twin-pump mode. 380 V, ±0.30% metering accuracy.<
Everything that makes this a high flow fuel dispenser is mounted side by side inside the frame: two CP8 combination pumps, two J6 flow meters, a D40 solenoid valve and stainless check valves, plumbed into a single 1.5-inch line that ends in a 2-inch high-flow nozzle.<
| Flow modes< | ~120 L/min (single pump) / ~210 L/min (twin pumps)< |
| Pump configuration< | Twin CP8 combination pumps< |
| Metering< | Twin J6 flow meters< |
| Valve train< | D40 solenoid valve + stainless-steel check valves< |
| Nozzle< | 2-inch stainless high-flow nozzle< |
| Frame< | Open-skid industrial frame, 1200 × 600 × 1800 mm< |
| Motors< | Twin 1.1 kW, 380 V< |
| Ex-proof< | Ex d mb IIA T4 Gb (CE011195) |
The two CP8 pump units run one at a time or together, so the same machine covers daily refuelling and bulk loading without a second installation.<
One CP8 pump unit runs alone. Lower power draw and a gentler stream for everyday refuelling of trucks, generators and site equipment — the mode most sites leave it on.<
Both CP8 pumps run side by side. Cuts tanker and haul-truck top-up time roughly in half when the queue is long or the tank is big.<
Six views of a current production unit, photographed on the workshop floor before packing.<
The complete open-skid unit: delivery hose, nozzle hook and the twin-pump bay in one welded frame.<
Brass inlet valve, stainless piping and the twin J6 flow meters on the top shelf — one per pump line.<
Both CP8 combination pumps with belt-driven 1.1 kW motors below the meter shelf, on vibration mounts.<
The stainless 2-inch nozzle is the reason the whole line is sized up — it passes twice the area of a standard 1-inch nozzle.<
1.5-inch delivery hose with a stainless swivel; wiring enters the head through a flameproof junction box.<
Stainless junction box and the nozzle hook on the column — no loose cables, nothing to snag a hose.<
| Component< | Qty< | Notes< |
|---|---|---|
| Industrial skid frame< | 1 | Open skid, welded< |
| Electric motor, 380 V · 1.1 kW< | 2 | One per pump< |
| CP8 combination pump< | 2 | Pump and air separator combined< |
| J6 flow meter< | 2 | One per pump line< |
| D40 solenoid valve< | 1 | Inlet control< |
| Internal piping, adapter and outlet fitting< | 1 set< | Stainless< |
| 1.5-inch fuel outlet pipe< | 1 | — |
| 2-inch high-flow nozzle< | 1 | Stainless steel< |
| 200L single-nozzle electronic head< | 1 | Total, price and preset display< |
| 200 mm flexible corrugated hose< | 2 | Accessories< |
| Stainless-steel check valve< | 2 | One per pump line< |
The twin-pump skid dispensing in our workshop. More product videos on our YouTube channel.<
High flow fuel dispenser — watch on YouTube<
Rated figures for the 120/210 L/min configuration. Site voltage and hose length can be built to order.<
| Dimensions (L × W × H)< | 1200 × 600 × 1800 mm< |
| Power supply< | 380 V, twin 1.1 kW motors< |
| Flow rate< | ~120 L/min (single pump) / ~210 L/min (twin pumps)< |
| Minimum measured quantity< | 5 L |
| Maximum permissible metering error< | ±0.30% |
| Noise< | ≤80 dB(A)< |
| Inlet vacuum< | ≥54 kPa< |
| Pump outlet pressure< | ≤0.3 MPa< |
| Unit price setting range< | 0.00–9999.99 |
| Preset range< | 1–999999.99 L / 1–999999.99 |
| Outlet connection< | 1.5-inch pipe, 2-inch nozzle< |
The choices that matter once a dispenser runs all day at 120 L/min and above.<
Two CP8 pump units share the work in twin-pump mode and back each other up in single-pump mode: if one line needs service, the dispenser keeps fuelling on the other.<
No cabinet panels to remove. Pumps, meters, filters and wiring sit in the open, so a technician sees and reaches everything in minutes.<
D40 solenoid valve, stainless check valves, corrugated hoses and the 2-inch nozzle ship with the skid — one delivery, one install.<
A high flow fuel dispenser is a dispenser rated well above the 40–60 L/min of a standard retail machine — typically 120 L/min and up. This open-skid model runs ~120 L/min on one pump and ~210 L/min with both CP8 pumps, sized for haul trucks, tanker loading and private depot islands.<
The two CP8 pump units run one at a time or together. Run one for ~120 L/min everyday refuelling, or run both for ~210 L/min when a tanker or haul truck is waiting. The mode is selected on the machine — no hardware change between jobs.<
380 V three-phase, driving two 1.1 kW pump motors. Tell us your site voltage when requesting a quote and we will build to match — other voltages are available on request.<
Maximum permissible metering error is ±0.30%. Quantity is measured by twin J6 flow meters with a minimum measured quantity of 5 L, and the electronic head supports preset delivery from 1 to 999999.99 L.<
The standard configuration is built for diesel and similar light fuels. Tell us your medium and we will confirm pump, seal and valve compatibility before quoting.<
Yes. We build high flow dispensers under customer brands as OEM — cabinet colour, logo and manuals can all carry your identity.<
The same components are available separately for fleets and service contractors.<
Tell us your peak flow, tank sizes and site voltage — we will confirm the 120/210 L/min configuration and quote within 24–48 hours.<
Request a quotation<
